CT012 Oval Cold Plunge Tub
Model: CT012
Cold Plunge Tubs
The CT012 is an oval cold-plunge tub with an elongated form described by VAPA as suited to multiple users and a range of garden layouts. Its introduction identifies a 304 stainless-steel interior, red cedar exterior and 20 mm insulation. The parameter table lists an Oxford cloth cover and states that an external chiller is needed.
Advantages & features
Elongated Oval Form
CT012 uses an oval, elongated form. VAPA describes the shape as offering room for multiple users without feeling confined and says it can fit a range of garden layouts. The source gives no capacity figure, so this remains a shape-and-layout description rather than a stated occupancy rating.
304 Stainless-Steel Interior
The CT012 introduction specifies a 304 stainless-steel interior and describes the material as strong and corrosion resistant. The parameter table also lists 304 stainless steel in the model description. A separate feature bullet gives conflicting thickness and grade options, so this copy does not assign a fixed steel thickness or 316 grade to CT012.
20 mm Insulation Layer
VAPA lists the CT012's insulation as 20MM thick. Its introduction describes the layer as intended to minimize heat loss and help keep water cold longer. These are source-stated design points, not a guarantee of water temperature or holding time under particular conditions.
Red Cedar Exterior
The CT012 introduction identifies a red cedar exterior and says it receives a special oil finish intended to protect it from weathering. The model table separately lists an Oxford cloth cover in its description. Confirm the exact finish, cover provision and package contents with VAPA, since the page does not spell out what is included.
Listed specifications
| Specifications (mm), as listed | 1300*800*720MM |
|---|---|
| Description | 304 stainless steel+red cedar+oxford cloth cover |
| Chiller requirement | External Chiller Needed |
| Inlet and outlet | 1/2 or 3/4-inch inlet and outlet |
Front Reference View
The image shows a broad top surface, wood-tone exterior panels, horizontal metal bands and a lower vented panel.
Reverse-Side Reference View
The image shows a broad top surface, vertical wood-tone exterior panels and two horizontal metal bands.
Confirm Chiller and Package Details
The CT012 parameter table says an external chiller is needed and lists 1/2 or 3/4-inch inlet and outlet options. It does not establish whether the chiller or the listed Oxford cloth cover is included or sold separately, or which connection size applies to an order. Confirm package contents, connection choice, and any requested size or finish variation with VAPA.
View the original VAPA listing
Request a model-specific quotation