CT011 Oval Cold Plunge Tub
Model: CT011
Cold Plunge Tubs
CT011 is an oval cold plunge tub with a red cedar exterior and a stainless-steel inner. The page lists 20 mm insulation and a product size of 1200*800*700MM, while also noting that sizes can be customized. An external chiller is required; confirm size orientation and included accessories with VAPA.
Advantages & features
Oval form for a lying-down position
The product page describes an elliptical form intended for lying down and calls the soaking area spacious. It also publishes one product-size string, 1200*800*700MM, without assigning length, width or height. Confirm orientation and fit for the intended installation rather than inferring the dimension order.
Stainless-steel inner construction
The introduction describes a 1.5mm-thick 304 stainless-steel inner, while the Features list says 304#/316#. The product table names 304 stainless steel. These are the source's grade references, not confirmation that both grades are supplied together; verify the selected grade and configuration with VAPA.
Insulation layer
CT011 is listed with 20MM-thick insulation. The introduction says the insulation helps maintain water temperature and reduce heat loss, and says the water stays cold longer. This describes the page's stated design intent; it is not a quantified temperature or performance guarantee.
Red cedar exterior and oil finish
The page identifies red cedar as the exterior material and says the wood is imported from Canada and treated with a special oil finish. It presents the finish as protection against weathering. The treatment description is source-listed product information, not a claim of a particular service life or maintenance interval.
Listed specifications
| Model | CT011 |
|---|---|
| Product size | 1200*800*700MM |
| Material listing | 304 stainless steel + red cedar; the table also lists an Oxford cloth cover |
| Stainless-steel inner | 1.5MM thick; the page names 304#/316# in Features and 304 stainless steel in the introduction and parameter table |
| Insulation | 20MM thickness |
| Chiller requirement | External chiller needed |
| Inlet and outlet | 1/2 or 3/4-inch |
| Cover options | Oxford cloth cover; wooden lid optional |
| Size customization | Different sizes can be customized; dimensions are not specified |
Closed-top reference view
Reference view showing the oval tub with a fitted top and exterior bands; top/accessory supply status is not confirmed.
Interior reference view
Reference view showing the open tub and visible inner surface; image appearance alone does not establish the material grade or included accessories.
Angled exterior reference view
Reference view showing the tub's oval exterior and visible bands.
Configuration & Supply Check
The CT011 parameter table says an external chiller is needed and lists 1/2 or 3/4-inch inlet and outlet connections. Before ordering, confirm the selected connection size, requested tub dimensions and their orientation, stainless-steel grade, and whether an Oxford cloth cover or optional wooden lid is included or available separately. The source does not establish accessory inclusion or standalone sale terms.
View the original VAPA listing
Request a model-specific quotation